Free Ramp Slope Calculator – Calculate Rise, Run and Ramp Length
Our free ramp slope calculator helps homeowners, builders, contractors, and accessibility planners calculate the dimensions of a ramp.
Enter the vertical rise and desired slope ratio to estimate the required horizontal run, sloped ramp surface length, and slope percentage.
How to Use the Ramp Slope Calculator
- Enter the vertical rise in inches.
- Enter your desired slope ratio, such as 12 for a 1:12 slope.
- Click Calculate.
- Review the horizontal run, sloped length, and slope percentage.
Wheelchair Ramp Calculation Example
Suppose a wheelchair ramp must overcome a vertical rise of 24 inches using a 1:12 slope.
Required horizontal run:
24 × 12 = 288 inches, or 24 feet.
The actual sloped surface length is slightly longer than the horizontal run.
Understanding ADA Ramp Slope Requirements
Under the 2010 ADA Standards, the maximum running slope for a typical accessible ramp is generally 1:12, with additional requirements and specific exceptions.
A compliant ramp may also require landings, handrails, edge protection, appropriate width, and limits on rise per run.
This calculator provides geometric estimates only. It does not certify ADA compliance or replace applicable building codes.
Ramp Slope Calculator
Frequently Asked Questions
What does a 1:12 ramp slope mean?
It means 12 inches of horizontal run for every 1 inch of vertical rise.
How long should a ramp be for a 24-inch rise?
At a 1:12 slope, the horizontal run is 24 feet, excluding additional space required for landings.
Is a 1:12 slope always ADA compliant?
No. Slope is only one part of accessible ramp design.
Can I use this calculator for residential ramps?
Yes, for preliminary dimensions. Verify local requirements and safe construction practices.